Where to locate the scanned file - Brother USA 4 The Destination Folder field will display the default destination for all files scanned with the Scan to File button You will need to open this folder to view scanned documents 5 To change the default Destination Folder browse to the location you want to save your files and click OK
Where to locate the scanned file - Brother USA ControlCenter is used to interface the "Scan to" keys on the Brother machine or for scanning from the computer When you use the "Scan to File" option, the scanned file is automatically saved in the default Scan Location or Destination Folder, which can be configured as follows:
Where to locate the scanned file - Brother USA Where to locate the scanned file ControlCenter or iPrint Scan is used to interface the "Scan to" keys on the Brother machine or for scanning from the computer When you use the "Scan to File" option, the scanned file is automatically saved in the default Scan Location, Destination Folder, or Save Folder, which can be configured as follows:
Lines on scanned documents - Brother USA Do the lines appear on one-sided or "side two" of two-sided scanned documents? - If one-sided scans or "side one" of two-sided scans, clean the scanner glass again focusing on the lower glass section
Scanned documents are printing with a blue tint - Brother USA If documents that you have scanned are printing with a blue background, you will need to calibrate the machine from within the printer driver Click here for instructions on how to calibrate the machine
Scanned documents are blank or partially blank - Brother USA 4 Adjust the resolution, contrast, and brightness settings when scanning You may need to try several configurations before finding the desired scan quality Light scans may occur if the document being scanned has light print Try increasing the the resolution to resolve this issue Click here to display all models covered by this answer
Vertical lines or streaks on copies, sent faxes, and scans Vertical lines on copies, sent faxes, or scanned documents are typically caused by dirt, ink, corrective fluid, or other debris stuck on the ADF scanner glass Cleaning the ADF scanner glass properly should resolve this issue
Reduce the file size of a scanned document using iPrint Scan - Windows . . . - For PDF and JPEG documents, use the "File Size" slider to choose a compression method between Small size and High Quality You may need to try several settings to get the best balance of quality and scan size - For PDF documents scanned at 300 dpi resolution, you may place a check next to High Compression PDF, which will reduce the PDF file