Has anyone got experience of Quansheng UV-K5(8) with Windows 11? The only issue I had was with the PL2303 driver, which installed a version saying "THIS DRIVER DOES NOT SUPPORT WINDOWS 11" in the Device Manager Finding and installing an older (1 x) version of the driver worked like a charm
QUANSHENG UV-K5 Driver | Device Drivers QUANSHENG UV-K5 Driver Device USB devices Radio Receiver Transmitters Manufacturer QUANSHENG Model No UV-K5 Also Known As CHIRP Driver Interface port(s) 2 Pin Serial (non-standard) FCC ID XBPUV-K5 Operating System(s) Windows 11 x64 Windows 10 x64 Windows 10 32bit Windows 8 1 64bit Windows 8 1 32bit Windows 8 64bit
Quansheng UV-K5 (8) and chirp - RadioReference. com Forums It seems the latest update for CHIRP can cause some problems with an upgraded UV-K5(8) but I have not updated CHIRP yet -if you have the correct cable you can select the Quansheng UV-K5(8) in CHIRP Sometimes you need an extra WIN10 or WIN11 driver
GitHub - egzumer uvk5-chirp-driver: Quanscheng UV-K5 radio CHIRP driver . . . CHIRP driver for UV-K5 K6 5R radios running Egzumer firmware Licensed cc-by-sa-4 0 This driver is added to official CHIRP release Choose UV-K5 radio model in the CHIRP download window It will automatically recognize egzumer firmware if it is on your radio, and all extra options will be available
Bug #11165: Unable to program the Quansheng UV-5R Plus using UV-K5 . . . Accoording to the documentation for CHIRP, specifically "Home and Compatability List" the instructions indicate to use the UV-K5 option for the model number Doing so renders an error " ERROR: Radio serial detection failed: Firmware '4 00 06' not supported"
Cannot connect Quansheng UV-K5 (8) with programming cable Check you're using the correct com port, the one that appears on plugging in the cable IIRC you should get a blue light on the radio, then turn it on, so make sure you're following the correct sequence If all that fails and the cable is correct try different software like Chirp with correct radio
Cant use the Quansheng software. . . help please? : r Quansheng - Reddit Just downloaded the UV-K5(8) programming software package from Quansheng It says I need to run the SETUP EXE from the CP210x_USB folder (assume this is a USB driver) However when I run it, I'm told " The current language is not supported by the Device Driver Installation Wizard "
Quansheng - Quansheng UV-K5(8) IJV MOD 3. 21 dead after uploading Chirp . . . The problem is Chirp It is not comatible with the upgraded firmware Best to use Quansheng portable CPS for programming and use k5prog-win for upgrades I have the IJV mod in my UV-K5(8) and the radio doesn't exist with chirp These radios can't be bricked, so if you have a problem with an upgrade, just roll it back
Bug #10815: error qith quansheng uv-k5 (8) - CHIRP When the radio is off, I connect it to the PC, and it recognizes the com port What Blue diode light? I have the k5 (8) it's the newer model The white flash light on the top does turn on when I hold the ppt button while turning it on But nothing is seen on the screen The comport is at 9600 bps