How to unflash a sd card - balenaEtcher - balenaForums Hi for a project i used etcher to flash a 2GB file into a 8GB sdcard now my sd card is ±50MB and i want my sdcard to return into 8GB Can you help me? PS:sorry if my english is bad i’m belgium
Launching belanaDash on a non-standard TFT screen (some success) Hello Gurus, I bought a cheap TFT 480x320 touchscreen from eBay advertised for use with Raspberry Pi 4 Understanding that there are some challenges there, I did make great progress and I’ll cover that Challenge: I can’t seem to get past the balena logo being shown on the screen to show a web page specified in LAUNCH_URL environment variable The logs say it’s showing, it’s just
Raspberry Pi 5: activate both camera ports cam0 and cam1 Hi there, I have two Raspberry Pi HQ Cameras connected to my Pi 5, but only one works… The problem is: dtoverlay cannot be configured to stay in one line, what happens is the following: BALENA_HOST_CONFIG_dtoverlay = imx477,cam0 leads to: root@8716879:~# cat mnt boot config txt extra_cmdline=cma=256M dtparam=i2c_arm=on dtparam=spi=on dtparam=audio=on avoid_warnings=1 disable_splash=1 enable
Supervisor stuck in restart loop - Product support - balenaForums A few hours ago the supervisor running on one of our devices started restarting endlessly I’ve attached the logs below but they dont seem particularly relevant, save for the “Received SIGTERM Exiting ” at the end Currently the system is up and operating from a user-perspective, but I’m nervous to do anything to fix the supervisor that might affect the users There is a window later
Jetson orin nano eMMC : UART dev ttyTHS1 not working Hello, I can’t use the UART dev ttyTHS1 correctly I tried with a GPS or a Bluetooth over UART Everything is working as expected when I don’t use a balena based Host but doesn’t work with Balena I talk about using pin 8 and 10 I know there is this link Jetson Nano UART ( dev ttyTHS1) not working but it doesn’t provide any solution I use OS version 6 4 0 For example, with Bluetooth
My SSD isnt detected by the program - balenaForums I just downloaded balenaEtcher on Windows as I want to burn an image on an SSD When I press select target, only the main C drive is detected I have an additional SSD connected which also shows up under “Devices and drives” Why isn’t it detecting it? Is there anything I can do?
Installing Hyperpixel4. 0 - Project help - balenaForums Hi, I’m trying to create a GUI project using the examlecode form here: Running a full desktop in a container (balena io) But I need to install the HyperPixel4 screen in the process I have tried multiple dockerfile commands without any luck I have downoladed the HyperPixel files to rpi3+ to the project folder, but it fails, saying it’s unable to locate the install sh Anyone had any luck
balenaEtcher not working on MacOS Big Sur 11. 4 Hey all, I’m trying to use etcher to flash jetpack 5 1 1 onto a 128GB microsd card Whenever I run it, it is stuck on “starting…” and never gets beyond that I’ve looked through the forums and have tried the following: 1…