About - Formula SAE California A Legacy of Competitive Education In 1981, SAE International (formerly known as Society of Automotive Engineers) developed and managed the first Formula SAE® (FSAE®) student competition with assistance of Ron Matthews, Professor at University of Texas
J1939-84 (WIP) OBD Communications Compliance Test . . . - SAE International The purpose of this SAE Recommended Practice is to verify that vehicles and or components are capable of communicating a required set of information, which is described by the diagnostic messages specified in SAE J1939-73, that is in accordance with off-board diagnostic tool interface requirements contained in the government regulations cited below
Simulation and Experimental Research on Compression Release Engine . . . A 3D grid model of engine brake is established for an automobile engine The dynamic compression release braking process is simulated by using this model In the process of engine braking, the movement of valve and piston causes changes of the internal flow field of the engine In this paper, the movement of valve and piston were defined by using the dynamic grid technology, so that the
Simulation and Experimental Research on Compression Release Engine . . . A 3D grid model of engine brake is established for an automobile engine The dynamic compression release braking process is simulated by using this model In the process of engine braking, the movement of valve and piston causes changes of the internal flow field of the engine In this paper, the mo
On Board Diagnostics Implementation Guide J1939-03 - SAE International Rationale: This version of SAE J1939-03 updates HD OBD reference to the adopted regulations from the July 2021 hearing, and adds HD IM references as adopted in the December 2021 hearing Figure 2 updates define the connection procedures needed to accommodate SAE J1979-2 Section 8 informs the implementation of HD IM Remote OBD (ROBD) devices for the new HD IM regulations
Attend - SAE International Vehicle Automation Symposium: Getting To SAE Level 4™ June 24 - 25, 2025 | Wien, Austria
SAE International® Publishes SAE J3400 2 Standard to Accelerate Safer . . . Part of the Broader J3400 Family of Standards, SAE J3400 2 Defines the Physical Architecture of Electric Vehicle Connectors and Inlets WARRENDALE, Pa (May 29, 2025) –SAE International ® has published a new standard, SAE J3400 2™ – Connectors and Inlets for the North American Charging System (NACS) for Electric Vehicles (EVs) Developed by SAE’s Hybrid-EV Committee, the new standard