com - Connect LPT printer to serial port - Super User I have a printer with LPT port and it needs to be connected to serial COM1 port via adapter Printer output is being rerouted to serial port COM1 with a command: mode LPT1=COM1 mode COM1: 9600,n,8
How do I simulate a parallel (LPT) Printer with a USB Printer? A Cables-to-Go model 16899 USB to DB25 parallel printer adapter is used to connect the printer to the computer The adapter installs automatically and is not recognized as a parallel device or LPT port Now open Devices and Printers Click Add printer and select The printer I want is not listed
How to wire the LPT and COM port headers on a motherboard? The cable+DB25 for the LPT port should work (assuming as @Brian pointed out that the marked edge of the ribbon cable is matched to pin 1 on the header) But you only have a 50 50 chance that the cable+DB9 for the COM port will work, since there are two common variations for numbering the header
How do I assign a LPT port for a usb to parallel adapter on Windows 7 I have a legacy DOS application that needs to print to a LPT port and only have USB ports on the host machine I have installed a usb to parallel adapter to connect the printer The adapter installed correctly with the USB Printer Support driver, however the adapter does not appear as a LPT port
Communicating with the LPT port through USB adapter I have an USB to LPT adapter, but the adapter doesn't emulate the LPT port Even with the driver installed, it shows as "USB Parallel Bridge" in Control Panel The hardware expects input on the data ports D0-D7 of the LPT
windows - Use serial port (COM) as LPT1 - Super User I have a device that needs to be plugged in to LPT1 to run a legacy software I am trying to find a workaround to get it running in a latptop (without parallel port, obviously) I have HL-340 USB-to-
legacy - LPT hardware in windows 10 pro - Super User So the problem is two fold, a physical 25 pin port connected through USB,and windows to identify the port as a real LPT port to the Wibu software I'd give in an buy a new version, which hasn't really changed much at all over the last 20yrs, but the app is god awful expensive and way out of my budget
parallel port - Using a printer in Dosbox - Super User It allows redirecting LPT1 (through LPT3) to an actual LPT port, a printer file ( prn), or to the virtual printer The valid options in the Parallel Dongle dialog are reallpt, printer, file and disabled
How to check COM ports in Windows 10? - Super User Device manager has a thing "View Hidden Devices" You have to specifically select that before the Ports (COM LPT) are even visible – zipzit Commented Oct 26, 2016 at 3:00
Is it possible to use a terminal emulator with the LPT port? The PuTTY emulator is said to emulate the DEC VT220 terminal If this is true, then why will it not connect over the LPT port? I think the VT220 had both a serial and a parallel port on its back Perhaps the parallel port was not used for communication? Maybe it was only used to print the screen, as a true LPT (Line Printer) port?