Where is a reputable place to download Ultimaker Cura? 6 I noticed that my version of Ultimaker Cura was out of date, so I tried to go to their website and download a new version For whatever reason, I could not get the download link to work properly in Firefox with a slew of security extensions Where are reputable mirrors for Cura?
ultimaker cura - How where do I hide the seam? - 3D Printing Stack . . . 3 In the Cura settings, search for "seam" This will then display the options to adjust those settings Make the following adjustments: Z Seam Alignment to User Specified Z Seam Position to Back Seam Corner Preference to Hide Seam This will position the seam to the best possible position both inside and out
ultimaker cura - How to get less Z-seam? - 3D Printing Stack Exchange 4 This Cura support page lists the options for Shell settings, specifically: Seam corner preference The Z-seam is hidden as much as possible by default However, for some projects, specifically those that require post-processing, exposing the seam can be necessary for the post-print processing To do so, you can adjust the following settings:
ultimaker cura - Layer above support is very rough - 3D Printing Stack . . . This surface, in conjunction with the correct gap and cooling when dialed in correctly will provide better surfaces above support structures Z distance (in Ultimaker Cura) This refers to the distance from the top and bottom of the support structure relative to the model This setting is divided into the top distance and bottom distance
ultimaker cura - Is it possible to change slicing line direction type . . . In Cura this model can be sliced using a support blocker that has the Per Model Settings configured with the Cutting mesh option: It is key to use the Cutting mesh option and add properties you can change for Wall Thickness, Wall Line Count, Top Bottom Thickness, Infill Density, Infill Pattern and Infill Line Directions
creality ender 3 - Where can I change the nozzle diameter in Cura? Why . . . For more information on generating custom Cura printer profiles look into Cura wiki "Definition File Types and the Base Definition Files" and Cura wiki "Adding new machine profiles to Cura" So if you're profile doesn't support variants we need to revisit: Where can I change the nozzle diameter in Cura?
ultimaker cura - What is the minimum density that could be used for . . . The default support density in Cura is 15% that is extremely hard to remove without damaging something, in various test using very low density around 5% and interface option I have got better results with PLA I'm wondering what is the absolute minimum value that could be used without invalidating the whole support purpose?
ultimaker cura - Print only part (fraction) of a model - 3D Printing . . . The latest version of Ultimaker Cura can do that (version 3 6) I have built models made of different material in the same model How to do this is: Select your CUBE and select the icon "Per Model Setting" in left side menu choice "Normal model", select the following settings: Top bottom thickness, wall thickness and infill percentage Very Important: all above settings must be set to 0
Is it possible to stack multiple models on each other using Cura if the . . . Although theoretically it should be possible to stack objects vertically, Cura does not support it out of the box You will need to change the following configuration under the [Preferences] menu to allow objects to be placed on top of each other: Automatically drop models to the build plate Ensure models are kept apart This is a bit tedious, but it works A different approach would be to make