The “How” and “Why” of the “Y Strainer” - Sure Flow Equipment Inc. You must pay attention to the orientation of the chamber which collects debris and the drain (blow-down) connection of the Y Strainer The strainer must be installed so that it is in the lowest possible position
INSTALLATION GUIDE - Legend Valve Follow standard installation practices for threaded, sweat, press, or flanged connections, and place the Y-strainer into the pipeline Ensure that the flow arrow on the body of the Y-Strainer is pointing in the direction of the media flow
INSTALLATION, OPERATION, AND MAINTENANCE - Keckley Start the piping system by opening the outlet valve nearest the Y-Strainer’s outlet first Then gradually open the inlet valve nearest the Y-Strainer’s inlet, approximately 25% of normal operational flow
Gate, Globe, Check Valve Strainer Manual 5 13-Y-strainer can be installed in either a horizontal or vertical position Make sure the screen is pointing downward, so that it can collect material in the strainer at the lowest point of the screen
Y Strainers Uncovered: Mesh Selection Installation Tricks Begin by closing the valves upstream and downstream of the strainer to isolate it from the system and prevent fluid from spilling during cleaning Open the air vent or drain valve to release any residual pressure, then close the valve once the pressure is relieved
Ward Y Strainers - Flomatic Valves Ward “Y” Strainers are available in a variety of materials and a full range of end connections to accommodate many different services The “Y” pattern design keeps fluids flowing with minimal obstruction
Correct installation method of Y-strainer - Bundor valve Y-type strainers are important devices used in pipe systems to filter impurities and protect equipment They are widely used in water treatment, petroleum, chemical and other industries In order to ensure that they work effectively, the correct installation method is essential
YS01 Detail | afcovalves AFCO Y Strainer offers a compact and cost effective solution for removal of debris or foreign material from the pipe lines Typically use in pump system, compressor, valve, or in similar application where the amount of debris to be removed is small, and frequent cleaning is not required