Solved: Variably Subnetted? - Cisco Community 172 16 0 0 16 is variably subnetted, 2 subnets, 2 masks C 172 16 10 0 30 is directly connected, Serial0 1 0 L 172 16 10 2 32 is directly connected, Serial0 1 0 Both 1 and 2 should be within the same 30 subnet so I am confused as to how I could have 2 subnets and 2 masks on each router?
Variable Subnetting - Cisco Community 10 0 0 0 8 is variably subnetted, 8 subnets, 2 masks can anyone explain what this means to me ? 10 0 0 0 8 is the classful network You can break the subnet down to smaller IP networks When you do this it is call subnetting Your output is telling you that you a have multiple IP subnets under the classful network of 10 0 0 8
sh ip route shows 10. 0. 0. 0 8 is variably subnetted - Cisco Community 10 0 0 0 8 is variably subnetted, 10 subnets, 3 masks is not a summary route (it has not next hop information for one thing) and is only the introductory statement that says that class A network 10 0 0 0 is present in the routing table - and that there are 10 subnets of that network present in the routing table and that collectively those
Routing table: 2 subnets, 3 masks. - Cisco Community 10 0 0 0 8 is variably subnetted, 2 subnets, 2 masks In the technical word, above mentioned route is called level 1 parent routes in the routing table of R1 The routing table basically provides a heading for the specific subnets it contains
Solved: Routing Table Question - Cisco Community Hello 10 0 0 0 8 is variably subnetted, 6 subnets, 2 masks These are called "parent level 1 routes" which are create automatically when a route with a higher subnetmask of the routes default subnetmask class is added to the route table which doesn't have an exit interface (loopbacks), if you notice it doesn't even have a route identification next to it or even a interface
Solved: show ip route routing table - Cisco Community Solved: hi all, i have a question regarding the output of the "show ip route" command: C 192 168 30 0 24 is directly connected, Ethernet0 172 16 0 0 24 is subnetted, 1 subnets S 172 16 1 0 is directly connected, Ethernet0 192 168 38 0 24
Solved: OSPF Between Two Subnets - Cisco Community We are going to use Cisco layer 3 switches instead of WAN routers for connecting two locations via MPLS To prepare for the installation, I set up a test environment to test the configuration of routed interfaces I was able to get two endpoint laptops to communicate by using static routes After re