No heat to the floor and no defrost - Dodge Nitro Forum Still no heat on the floor and no defrost Then Monday nite my wife came home and told me the great news-everything works The Nitro now has defrost and floor heat and dash heat I can't explain it, maybe the computer reset itself whatever Anyway, I'm glad I joined this forum and to the members who contribute helpful information to others I
No Crank, No Start ( Solved) - Dodge Nitro Forum I have a no crank, no start problem, it is an 08 Nitro with a 4 0 litre engine, automatic, remote locks and start The truck has 78000 kms on it Changed the starter, try it in park, cranked once for a second, won't crank after that Tried it in neutral, cranked for a second and quite (three
blend door help - Dodge Nitro Forum I purchased a 2007 Dodge Nitro and the blend door actuator needs replaced I need to know where the actuator is located
How To: Replace Fuel Injectors in 3. 7l Engine - Dodge Nitro Forum By now many owners have racked up a good amount of miles And may be dealing with similar issues that did Experiencing a rough, shaking idle? Fuel milage gone south but no change in driving habits? Receiving check engine lights with codes for misfires even after changing your plugs and checking
O2 Sensor Issue (bank 2, Sensor 2) - Dodge Nitro Forum Hi everyone, For some reason I've been having an issue recently with my Nitro throwing a P0058 fault code with the description - "HO2S Heater Control Circuit High (Bank 2 Sensor 2)" Now this has happened after running E10 fuel (10% ethanol, approx 94 octane) since the car was new (now has
Only have heat on passenger side - Dodge Nitro Forum I did preform a flush with compressed air and liquid right after the cleaning the nitro was piping hot on drivers side the minute we turned the blend controller to cold we lost all the heat on the drivers side
spark plug ignition wires? - Dodge Nitro Forum I have a question for all of the long time Nitro owners out there Has anyone had problems with, or replaced, the ignition wires (if that's what they're called? the wires that connect to the ignition coils, over the spark plugs)? I'm asking because it's inspection time, which for me means my
Blend Door Actuator Replacement. - Dodge Nitro Forum With the Nitro running, If you look under the dash at the blend actuator, and change the heat setting, you should see the blend door actuator move as well as the little white arm
Dipstick - Dodge Nitro Forum Is there an aftermarket Transmission dipstick availiable for a 2008 Nitro with the 3 7 V6?